These typical fasteners originate from the Gudo beginning, and were used by well known ski boot manufacturers. Later the applications became more diversified, e.g. in industry, cars, also in boots and shoes.
Our newest lever fastener is used, among other things, in combination with a stirrup or a steel cable with a steel case. In addition the fastener has a snap function, which holds the lever in closed position active. This feature preserves an unintentional opening of the lever.
Lever fastener for textile straps. Usually used in the orthopaedic area.
Tension fastener with round stirrup. The practically infinitely variable preset adjustment can be achieved with a clip and toothed belt. Simple handling with a large scale effect.
The FLEXON fastener is made out of aluminium or plastic and is used in combination with an insulating steel cable. The fastener is mounted on a movable raster on the base plate. Thereby a fine adjustment of the wire transmission is cause.
The fastener RVK can be used with a stirrup or a steel cable with a case. The fastener RVK is mounted with a plastic plate and has a raster function when closed. As a result the lever is protected from unintentional opening.
This lever is used either in combination with a cable or stirrup. The safety catch prevents an unwanted opening of the lever.